Suspended load transport
From MarineBiotech Infopages
Particles in the water column of a turbulent flow can be carried over long distances as long as the net balance between upward suspending forces and gravity remains positive.
Sediment concentration profiles typically show a two-layer structure:
- Dilute suspension transport layer: Far enough from the bottom, i.e. in the outer layer, the turbulence is fully-developed and the concentrations are low, typically smaller than 0.1%, corresponding to dilute conditions
- High-concentrated (HC) suspension transport layer: The inner layer above the bottom is characterized by low-Reynolds conditions (developing turbulence) and high concentrations. Since the inner layer usually is thin (of the order of a few centimetres), it often falls outside the depth range where measurements are collected, and therefore largely remains undetected and little known. It comprises both the bed load and the sheet flow conditions for sand. Analysis of flume data suggests that particles are also kept in suspension by additional turbulence generated in the wake of the particles, which respond slower to the turbulent movements of the ambient water due to their inertia.
- Sediment transport formulas for the coastal environment
- Sand transport
- Manual Sediment Transport Measurements in Rivers, Estuaries and Coastal Seas
- Sediment deposition and erosion processes
- Dynamics of mud transport
Please note that others may also have edited the contents of this article.